Gdavid
Guru
The anchor brand multi connector is tinned and probably the most common. I tend to think of multi connector wire as romex because that is what it looks like but it is certainly different and the multi strand conductors make it limp unlike romex.
I like to use closed loop terminal fittings on all boat wiring but outlets can be a pain with these as the threads on the screws are defomed a bit to make them captive, they can be forced out but can be a bear to get started again. This may be one good use for slotted terminals but so far I just fight the screws off and back on again. Someone probably makes more marine friendly outlets but I have not seen them.
I like to use closed loop terminal fittings on all boat wiring but outlets can be a pain with these as the threads on the screws are defomed a bit to make them captive, they can be forced out but can be a bear to get started again. This may be one good use for slotted terminals but so far I just fight the screws off and back on again. Someone probably makes more marine friendly outlets but I have not seen them.
Last edited: