The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
Bacchus

Latest activity Postings Media Albums Resources About

    • Bacchus
      Bacchus reacted to hiestand's post in the thread Outboard trailer trawler wanted with Like Like.
      Looking at Nimble but open minded to others.
    • Bacchus
      Bacchus replied to the thread New AGM batteries from Trojan.
      Trojan advises 80% DOD will not harm their std AGMs so seems like a high premium for the addnl capacity?
    • Bacchus
      Bacchus replied to the thread Camano Troll Sewer Bladder.
      I've never had a bladder holding tank but one issue I've read posts about is re: odors. It is impossible to get adequate air flow to the...
    • Bacchus
      Bacchus replied to the thread Mainship 34T Engines.
      My 2008 has the 370 and it has been trouble free. I doubt the performance difference would be significant. I'd buy either one based on...
    • Bacchus
      Bacchus replied to the thread Mainship.
      Here's my project to replace carpet in fwd cabin. https://www.trawlerforum.com/threads/ms-34-t-ht-fwd-cabin-sole-upgrade.46119/ Only one...
    • Bacchus
      If it's a 15A circuit breaker shutting down... The unit it close to your limit (12A) assuming V is full 125V. Many marinas run low V...
    • Bacchus
      I had an old mechanic tell me to just drill a small (1/8") hole in the thermostat to bleed the air. The beware Yanmar Tstat i ordered...
    • Bacchus
      That's been my experience. When I inquired (2×) they didn't even respond. Let us know your experience
    • Bacchus
      The 12V pump I used has 2 outlets. You can either connect them to increase flow or supply 2 Bubbling tubes. I used one bubbler tube on a...
    • Bacchus
      Bacchus replied to the thread Trawler Forum App.
      I dont believe one will be offered. There are some settings / adaptations that help use the current version on mobile devices. From...
    • Bacchus
      Bacchus replied to the thread Your thought folks.
      @DeClutter Welcome aboard TF. I'll bet you will find lots of ideas here as I have. @dhays Thanks for the compliment Dave. Many of my...
    • Bacchus
      Here is the part puc & MS info from the source. You should be able to get a replacement frame from Garelick. My bolt holes wore larger...
      • Screenshot_20240920_204120_Chrome.jpg
    • Bacchus
      Don't understand... has the step broken or fastener as stated? Pic would help.
    • Bacchus
      Bacchus replied to the thread Removing epoxy.
      One other though for how to apply heat w/o affecting a large area... you could try a small pointed soldering iron to heat very locally...
    • Bacchus
      Can you put an elbow w even a short horizontal w small holes drilled and insert from top? 120V is fine as long as it's available 24/7...
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top Bottom