boomerang

We've been to the Carolina beach mooring field twice now but have never taken the time to take the dink in and tour the area. It's...

Thank you for the links. I don't recall seeing any silicone or rubber dampening pads on either of them ever but then again I'm not all...

If I recall properly, the Spurs has the rubber buttons to cushion the part from tapping against the stationary holder Maybe these have...

Yes, the only function I can discern for them is to activate all four pumps when the high water float switch comes on. It is (obviously)...

It definitely changed with the RPM's. With 3 to 1 clutches, it's easier to hear the increase/decrease with each revolution. The zincs...

Wait a sec. I reread the OP's first post and apparently the only thing that relay board does is turn on all of the pumps if the HW alarm...

Dumb me. Yep, I remember that gasket and plate on the circulating pump. When I replaced the pump the first time, the engine was in and I...

Whew, I can't imagine the undertaking of replacing all of the wiring concerning the bilge pumps on a Mainship 40! That would be my 1st...

If I'm understanding your post correctly, your raw water pump is bolted to the engine directly? Ours was clamped onto a mounting bracket...

Last fall, while bring our boat South, we arrived at the bridge in Wrightsville beach early and ,as anyone knows who has ever been...

I know. right? Mainship obviously included these relays to be able to use smaller gauge wiring from the source to the switch and back...

Thanks all, for your input. I was tending to obsess over matching the exact font that has been used in the past but just went with a...

Gregg FYI I was just giving Tiltrider a hard time about his choice of wire connections from another thread. I have no input regarding...

I heard OA's used those cheesy grease-filled button connector splices like the telephone company used. That would be a deal breaker for...

Last summer I went to a local sign shop to get a name made for the transom and running boards of our boat. While I was happy with the...