NWboater2
Senior Member
- Joined
- Apr 28, 2021
- Messages
- 115
- Vessel Name
- Ripple
- Vessel Make
- 2005 Grand Banks 42 EU
Hello all — just hauled the still pretty new to us 05 gb 42 Europa, at Nordlund in Tacoma.
Primary list is:
-seahawk bottom paint
-service abt/Trac stabilizers
-service( and upgrade props for) Sidepower bow and stern thrusters
-replace tides shaft seal, install spare
-replace spurs line cutter, probably with shark, and add dunce cap anode
-service rudder and steering
-prop speed
First question- am I missing anything that I should address out of the water
And, when they cleaned the prop there are some I think relatively minor pitting. Pic attached. Project manager is checking with prop guy but first thought is it’s okay. Thought I’d see what the collective wisdom is on this one though. What do you think? Okay for now? Thanks!
Primary list is:
-seahawk bottom paint
-service abt/Trac stabilizers
-service( and upgrade props for) Sidepower bow and stern thrusters
-replace tides shaft seal, install spare
-replace spurs line cutter, probably with shark, and add dunce cap anode
-service rudder and steering
-prop speed
First question- am I missing anything that I should address out of the water
And, when they cleaned the prop there are some I think relatively minor pitting. Pic attached. Project manager is checking with prop guy but first thought is it’s okay. Thought I’d see what the collective wisdom is on this one though. What do you think? Okay for now? Thanks!