Comodave
Moderator Emeritus
- Joined
- Jul 2, 2015
- Messages
- 21,358
- Location
- Au Gres, MI
- Vessel Name
- Black Dog
- Vessel Make
- Formula 41PC
No problem. If AD can copy it to me I will be glad to post it.
I will try to attach the file here. Have not done a pdf file berore so I am not sure if it will work.
Ditto
As an avid mechanic (amateur), I've just never been able to get that bent about the dual systems to get profane publicly about it, but to each his own. On the other hand, this:
Just doesn't stand up to serious scrutiny:
I have the Bob Smith list, attached. I think this was in my paperwork from one of the 3 PO's when I bought the boat... I think. Maybe found it online, not sure. Let me know if there is an issue reading it and I will see what I can do about making it a little sharper.
Check post #36 for a clean copy from ADC.
There you go, didn't see the post. If appears they are slightly different? The one I have mentions additional tools for Lehmans at the bottom.
Love his comment at the bottom of the PDF..."This is just a start".
The mentioned red touchup paint will look great on my Cummins.
As an avid mechanic (amateur), I've just never been able to get that bent about the dual systems to get profane publicly about it, but to each his own. On the other hand, this:
Just doesn't stand up to serious scrutiny:
Except when the NASA Mars orbiter was lost due to one engineering team using SAE units and another using metric.
My boat has a mixture of metric and SAE, so I thought I need "everything".
I use my boxes for trim!
one bag for most used, one for less used, and a hard box (that doubles as a step up into the v-berth bed) for the oddball and specialty stuff
A flip socket will work. 20 on one side and 21.5 on the other.I can’t find an SAE or metric socket to remove engine zinc on Volvo TMD41a engine. A friend loaned me her calipers and it’s 21.5mm!
Nothing seems to fit it. I’d like to find a socket but neither 21 or 22 work. My friend said to use a 6 sided type socket rather than 12 and can’t find it at auto part store. Any suggestions besides buying a boat with a Lehman?
I can’t find an SAE or metric socket to remove engine zinc on Volvo TMD41a engine. A friend loaned me her calipers and it’s 21.5mm!
Nothing seems to fit it. I’d like to find a socket but neither 21 or 22 work. My friend said to use a 6 sided type socket rather than 12 and can’t find it at auto part store. Any suggestions besides buying a boat with a Lehman?