TJ Sprocket
Veteran Member
- Joined
- Jul 21, 2016
- Messages
- 33
- Location
- United States
- Vessel Name
- Blue Heaven
- Vessel Make
- Mainship 430 Aft Cabin
I'm looking to replace the rudder position transducer on recently acquired 2006 Mainship 430 Aft Cabin. Having trouble finding where the wires route from the engine room up to the flybridge. Any help would be appreciated.
Also, looking to install WiFi repeater on the mast. Assuming I run the cable down the inside of the mast, where do I get access to it to get it eventually over to the cabinet to port of the aft steps?
Also, looking to install WiFi repeater on the mast. Assuming I run the cable down the inside of the mast, where do I get access to it to get it eventually over to the cabinet to port of the aft steps?