wkearney99
Guru
- Joined
- Feb 17, 2018
- Messages
- 2,166
- Location
- USA
- Vessel Name
- Solstice
- Vessel Make
- Grand Banks 47 Eastbay FB
I've got a couple of breakers I'd like to re-label. I don't want the one for the Wi-Fi reading 'Sat TV'. There's one for the AIS that's not showing the backlight either, someone else previously must've used a tape printer like mine.
I've got a Brother p-touch tape label maker, but it seems most of their tapes are opaque. Are the tape printers out there that'd make these? As in, black background with white lettering that allows backlighting to shine through? Or are these generally only available from a stock series of labels?
I don't have any close-up pix of the breakers. This is a close as I've got on-hand at the moment. If I had to guess I'd say they're BEP Marine panels?
BEP has sheets of labels, but I wouldn't mind custom ones if they weren't stupidly expensive.
I've got a Brother p-touch tape label maker, but it seems most of their tapes are opaque. Are the tape printers out there that'd make these? As in, black background with white lettering that allows backlighting to shine through? Or are these generally only available from a stock series of labels?
I don't have any close-up pix of the breakers. This is a close as I've got on-hand at the moment. If I had to guess I'd say they're BEP Marine panels?
BEP has sheets of labels, but I wouldn't mind custom ones if they weren't stupidly expensive.