seasalt007
Guru
I recently had my 10" high blue gelcoat hull stripe painted with standard Awlgrip. The color was Flag Blue. The person who rolled/tipped the paint is an absolute master with 40 years experience. It looked great.
Until, a guy came along and ruined the job by using an aggressive cleaner to remove some adhesive residue left over from a 1/4 "tape stripe that was applied on the new paint then removed because it was not sticking well. The product he used is called Max Pro Citrus cleaner. Instead of carefully removing only the adhesive he wiped the entire stripe with broad strokes over the entire stripe which resulted in large areas of cloudy scratches.
The entire paint job had to be done over
Not much is known about the use of citrus cleaners on paint but I am researching it.
Until, a guy came along and ruined the job by using an aggressive cleaner to remove some adhesive residue left over from a 1/4 "tape stripe that was applied on the new paint then removed because it was not sticking well. The product he used is called Max Pro Citrus cleaner. Instead of carefully removing only the adhesive he wiped the entire stripe with broad strokes over the entire stripe which resulted in large areas of cloudy scratches.
The entire paint job had to be done over
Not much is known about the use of citrus cleaners on paint but I am researching it.