Fotoman
Guru
- Joined
- Nov 12, 2009
- Messages
- 649
Wondering how to remove those filters to change them. Do I unscrew them? Looks like there is a drain plug at the bottow of each but when I removed it nothing came out. I'm a bit puzzled.
Yes, I've seen those and they look great but for now I'm going to stick with the original filters as I have about a dozen in stock from the PO!BaltimoreLurker wrote:
Some folks have replaced them with these:
http://www.abcprecision.com/index.html
Open the bleed screws and they will drain. The elements are held in place with a long bolt from the top of the housing.Fotoman wrote:
Wondering how to remove those filters to change them. Do I unscrew them? Looks like there is a drain plug at the bottow of each but when I removed it nothing came out. I'm a bit puzzled.
What are the other 4?Marin wrote:
The spin-on secondary adaptors are one of the five best "mods" you can make to an FL120 according to Bob Smith at American Diesel.
What are the other 4?BaltimoreLurker wrote:
Marin wrote:
The spin-on secondary adaptors are one of the five best "mods" you can make to an FL120 according to Bob Smith at American Diesel.
Marin wrote:
This has been discussed in a previous thread somewhere--- RT Firefly asked the same question awhile back.
But the other four are:
Egregious wrote:
I have the same twin CAV filters the OP was asking about.* I was about to order the adapters from ABC, but after measuring the clearance, I don't think the adapter and new filter will fit.