The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
Greg QS

Latest activity Postings About

    • Greg QS
      Greg QS replied to the thread Prop puller tools.
      I have a prop smith puller. I have a spare shaft. I have spare props. When traveling it is important to have spares and the tools you...
    • Greg QS
      Greg QS replied to the thread Quick gyro.
      OOOOOh baby getting close. 220 volt wiring done wiring bundle ran to the unit. Was a pain I had to cut through a stringer and...
      • KIMG2027.JPG
      • KIMG2025.JPG
      • KIMG2026.JPG
    • Greg QS
      need heat exchange plate circulators zoning valves ( you can get them directly on the manifold) thermostats acquastats 2 for engine...
    • Greg QS
      Greg QS replied to the thread Fluid in, fluid out.
      I have 300 gal of fresh water on board. I don't drink it. We cannot cycle it fasts enough.. It is for toilets, dishes, showers, deck...
      • 1738353422748.png
      • 1738353476540.png
    • Greg QS
      You do not run your engine coolant through the heater, you use a heat exchange plate with an additional circulator pump. You keep the...
    • Greg QS
      Open systems do not need an expansion tank. Like an engine . It has an over flow bottle. My hurricane system for my hydronic heat...
      • 1738336226622.png
      • 1738337151456.png
    • Greg QS
      Greg QS replied to the thread marine a/c stopped pumping water.
      Its a freeze up. When you use a ac in the summer the discharge is hot or considerably warmer ( 10-15 deg) than the sea water. When...
    • Greg QS
      Greg QS replied to the thread How boats sink!.
      Yes it was bonded. Yes and oversite on my part. Though it was worth sharing, A simple mistake and it could have been tragic.
    • Greg QS
      Greg QS replied to the thread How boats sink!.
      yes it is. A port in the t for winterizing. Never had an issue with the caps. I have them on all the small sea strainers. Been doing...
    • Greg QS
      Greg QS replied to the thread How boats sink!.
      My feelings exactly. Does anyone have a feelining about schedule 80 pvc for these parts. or maybe Marlon.
    • Greg QS
      Hi all . I see a lot of you following my post on Quick Gyro. I was cleaning up and making some new labels for my fuel manifold when I...
      • KIMG2011.JPG
    • Greg QS
      Greg QS replied to the thread Quick gyro.
      220 v wiring done!
      • KIMG2005.JPG
      • KIMG2007.JPG
    • Greg QS
      Greg QS replied to the thread Quick gyro.
      Things to do. 1 finish 220 v wiring 2 finish harness to the gyro. 3 install network connections ( waiting on the part) and control...
    • Greg QS
      Greg QS replied to the thread Quick gyro.
      More picw
      • 202501251308471737828527029.jpg
      • 202501251309261737828566270.jpg
      • 202501251328261737829706844.jpg
      • 202501251328081737829688996.jpg
      • vlcsnap-2025-01-26-10h41m47s573.png
      • vlcsnap-2025-01-26-10h41m44s903.png
      • vlcsnap-2025-01-26-10h40m58s031.png
      • vlcsnap-2025-01-26-10h35m15s547.png
      • KIMG1989.JPG
    • Greg QS
      Greg QS replied to the thread Quick gyro.
      Yesterday was the day. I put the gyro in my truck with my engine hoist and drove so cautiously to the marina. It was all strapped...
      • KIMG1990.JPG
      • KIMG2001.JPG
      • KIMG1993.JPG
      • 202501260944461737902686324.jpg
      • vlcsnap-2025-01-26-10h21m35s754.png
      • 202501251304281737828268077.jpg
      • 202501251307041737828424304.jpg
      • 202501251307491737828469212.jpg
      • 202501251308121737828492370.jpg
      • 202501251324151737829455635.jpg
  • Loading…
  • Loading…
Back
Top Bottom