Arthurc
Guru
Hi all, After a 1 year hiatus from boat projects I've got a long list before summer and starting to finally build my fuel manifold. I plan on tig welding stainless fittings for the manifold as it will eliminate most leak points and lead to a cleaner install. In terms of valves I've been wondering about using these serviceable stainless valves, big advantage I see is that I could take apart the valves and weld on the fittings then reassemble without risking any heat on the seals. Curious if anyone has experience with them.
https://www.amazon.com/DERNORD-Ball-Valve-Inch-Threaded/dp/B07DVNL865/ref=asc_df_B07DVNL865/?tag=hyprod-20&linkCode=df0&hvadid=242021983106&hvpos=&hvnetw=g&hvrand=16191253819334685760&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9033255&hvtargid=pla-473832637616&th=1
Thanks much.
AC
https://www.amazon.com/DERNORD-Ball-Valve-Inch-Threaded/dp/B07DVNL865/ref=asc_df_B07DVNL865/?tag=hyprod-20&linkCode=df0&hvadid=242021983106&hvpos=&hvnetw=g&hvrand=16191253819334685760&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9033255&hvtargid=pla-473832637616&th=1
Thanks much.
AC