42 year old tank....

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
Could you please share the cost of the repair, I have the same problem with our port 300 gallon tank,

Thank you
 
So is that membrane or paint on stuff?
 
See posts above with pictures
 
I actually never fixed it. I found out that the leak is higher up somewhere and I can fill the tank half way without a drip. Not the best solution but at least our boat does not list as much anymore.
I kept the two part epoxy that is used for aircraft fuel tanks just in case.
 
Repaired welded steel tank in my lobsterboat using Por15 and Por Paste.
Weeping at a rusted bottom weld. Repaired from the outside. That was 15 years ago and still fine
 
IF someone is replacing fuel tanks DIY , they will save the huge labor cost.

Monel with a sump would be #1 construction material ,

If just a box for fuel plastic would be #2 choice.
 
Back
Top Bottom