Drago
Veteran Member
Does anyone know how to adjust the friction on a older model, twin Morse throttle control? i just replaced the cable and there is not enough friction to keep it in plsce.
Morse Throttle control
- Thread starter Drago
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
Keysdisease
Guru
Morse Twin S
Attachments
- Joined
- Nov 8, 2012
- Messages
- 2,315
- Location
- USA
- Vessel Name
- Sandpiper
- Vessel Make
- Bluewater 40 Pilothouse Trawler
Morse has a friction kit available for the throttle lever. It consists of a plate with ridges that attaches to the side of the cover. A plastic dowel, spring and an adjustment screw with knob that fits into the screw hole hown in #3 above.
The plastic dowel rides on the grooved plate creating friction and the amount of friction adjusted with the knob.
I'm not sure if it still available. Last one I bought 2as 10 to 15 years ago.
Contact Morse/Teleflex to see if it's still available.
The plastic dowel rides on the grooved plate creating friction and the amount of friction adjusted with the knob.
I'm not sure if it still available. Last one I bought 2as 10 to 15 years ago.
Contact Morse/Teleflex to see if it's still available.
Last edited:
