skipperdude
Guru
I have been working on my heat exchanger. The bonnets on either end of the exchanger are of bronze. The bolts used to hold everything together are of steel. They are rusting. Are silicon bronze bolts a good substitute for the steel ones? Are they strong enough.
I Realize that the casing for the exchanger is cast steel. The issue is two dissimilar metals.
If I replace the bolts with the bronze I have bronze bolting through steel.
If I use steel bolts I still have steel going through bronze.
Comments?
SD
I Realize that the casing for the exchanger is cast steel. The issue is two dissimilar metals.
If I replace the bolts with the bronze I have bronze bolting through steel.
If I use steel bolts I still have steel going through bronze.
Comments?
SD