I have a NL M843 NW3 - it has shut down twice after being operated for some hours - all engine parameters are normal so it appears to be a hot generator head - although I can't find anything describing this in the generator head manual...
The symptons are: normal engine data, temperature is OK, water flow, oil pressure etc....then it suddenly looses RPM, then shuts down. The fuse on the generator head has popped out, and the way to get it started again is to reset the internal breakers and then reset the fuse....
So - I assume its the generator head that either overheats or overloads although there is no indication of either - except for the fact that it only happens after several hours of use at about 60-70% load.
Any idea?
The symptons are: normal engine data, temperature is OK, water flow, oil pressure etc....then it suddenly looses RPM, then shuts down. The fuse on the generator head has popped out, and the way to get it started again is to reset the internal breakers and then reset the fuse....
So - I assume its the generator head that either overheats or overloads although there is no indication of either - except for the fact that it only happens after several hours of use at about 60-70% load.
Any idea?