seattleboatguy
Senior Member
I have 2 questions for ye today:
- The throttles at my upper and lower steering stations are mechanically linked to the speed controller on the engines. If I increase engine speed to, say, 1800 rpm, and then let go of the throttle, the engine speed will drop to around 1500 rpm. Is this something I can adjust-out of the linkage somewhere, or do I have to replace something to get the engine to "stick" at the speed I initially set it? The throttles are 1987 vintage Morse controls.
- There is a little window on my tachometer near the hour meter, and this window alternates between a black window and a white window at roughly 3 second intervals. What is the purpose of this window (see pictures below):