View Single Post
Old 11-26-2022, 05:28 PM   #2
Lepke
Guru
 
Lepke's Avatar
 
City: Between Oregon and Alaska
Vessel Name: Charlie Harper
Vessel Model: Wheeler Shipyard 83'
Join Date: Jun 2016
Posts: 2,856
By your drawing, the refer always runs on DC. It appears that the AC side of the rectifier isn't putting out the correct voltage. 26v is causing a high voltage safety to cut power. Also voltage too low will stop the power. Most appliances will work with +/- 15%.
Lepke is online now   Reply With Quote