Taras
Senior Member
- Joined
- Jan 11, 2008
- Messages
- 405
- Vessel Make
- Currently Boatless
Getting ready for a haul out and plan to replace my Naiad 252 fin stabilizer shaft seals. These are the seals that keep the water out at the fin/hull location.
I was able to find one youtube video showing how the hydraulic pressure is applied to separate the fin from the shaft.
My question is how much should I plan to spend (approximately) to have the seals replaced? I believe there is more than one on each side.
Just planning budget.
Obviously prices vary but just trying to get a ball park.
Thanks everyone for any input!!
Steve
I was able to find one youtube video showing how the hydraulic pressure is applied to separate the fin from the shaft.
My question is how much should I plan to spend (approximately) to have the seals replaced? I believe there is more than one on each side.
Just planning budget.
Obviously prices vary but just trying to get a ball park.
Thanks everyone for any input!!
Steve