Propnut
Senior Member
I just finished removing every piece of my sanitation system. I'm ordering a new 40 gal. tank from Ronco plastics.
58" long 14" wide and 12" tall
The new tank is going be placed under the forward companion way on a flat fiberglass floor. What is the best material to set the tank on to avoid any chaffing? I'm thinking some form of rubber or neoprene, but not sure.
Looked on line and there's a thousand different choices. Any expertise as to the best material for this would be appreciated. I know Ronco recommends building a box that supports the tank on all four sides, but I think that is to cover there *** in case of an failure.I can't see doing that for a tank this size with 3/8" walls. Suggestions appreciated.
Don
58" long 14" wide and 12" tall
The new tank is going be placed under the forward companion way on a flat fiberglass floor. What is the best material to set the tank on to avoid any chaffing? I'm thinking some form of rubber or neoprene, but not sure.
Looked on line and there's a thousand different choices. Any expertise as to the best material for this would be appreciated. I know Ronco recommends building a box that supports the tank on all four sides, but I think that is to cover there *** in case of an failure.I can't see doing that for a tank this size with 3/8" walls. Suggestions appreciated.
Don