PJHoffnet
Senior Member
- Joined
- Aug 20, 2018
- Messages
- 192
- Location
- USA
- Vessel Name
- Changes in L'Attitudes
- Vessel Make
- 1999 Maxum 4100 SCA (not a trawler)
Wasn't sure if this was more appropriate in this forum or the EE&N, so I'll start here.
Finishing up on the hard, replaced xducer and finished bottom painting. I taped off the 'face' of the xducer (rubber part) to prevent any bottom paint getting on it. Will now finish off covering the fairing block with Pettit 1793 transducer paint.
One thing I'm unsure of is whether or not the rubber face of the transducer gets painted (area circled in the image). It would seem to me the answer is no, since it would interfere with the outgoing ping and echo return. If not, then how do I protect this area from growth?
Finishing up on the hard, replaced xducer and finished bottom painting. I taped off the 'face' of the xducer (rubber part) to prevent any bottom paint getting on it. Will now finish off covering the fairing block with Pettit 1793 transducer paint.
One thing I'm unsure of is whether or not the rubber face of the transducer gets painted (area circled in the image). It would seem to me the answer is no, since it would interfere with the outgoing ping and echo return. If not, then how do I protect this area from growth?
Last edited: