TomAnderson20619
Member
- Joined
- Jun 22, 2020
- Messages
- 20
- Location
- USA
- Vessel Name
- Water Music
- Vessel Make
- 1985 Albin 43 Trunk Trawler
During the recent survey of our new boat (1985 Albin 43 Trunk Trawler), surface stress cracks and gelcoat crazing were found. In an effort to prevent moisture getting into the laminate, the surveyor recommends filling and sealing. A lot of these are at the junction of the hull side and deck.
What would you recommend to seal these cracks? Most are very narrow (really just cracks), but tend to be long. Note that there is no delamination and moisture levels are currently normal.
What would you recommend to seal these cracks? Most are very narrow (really just cracks), but tend to be long. Note that there is no delamination and moisture levels are currently normal.