I'm going to be installing a Splendide WD2100XC Washer Dryer. I'm thinking about tying the drain into the drain for our sink in the head vs. adding another thru-hull. The sink has a 1 1/4 ID drain and exits the boat about 2' under the water line. The W/D unit will be ~2' above the waterline.
I'm concerned that I won't get enough draining capacity while the washer is dumping water.
Does anyone have experience draining this type of unit and under similar circumstances?
Thanks much.
I'm concerned that I won't get enough draining capacity while the washer is dumping water.
Does anyone have experience draining this type of unit and under similar circumstances?
Thanks much.