*Ours aren't.* Every GB I've been on including ours and the one we chartered has "normal" interior and exterior doors with sharp, square corners and edges.Forkliftt wrote:
Why are most interior boat doors round on the top? An inquiring Admiral wants to know. They look great for sure- but is there a reason other than looks??
*Marin wrote:
*I assume this is because a rounded shape will hold pressure more reliably than a square-cornered shape.
This is true in a lot of design criteria. Molded plastic parts, fiberglass molds, etc. The molecules align themselves in a straightline pattern at any sharp corner whereas with a rounded (radius) corner the molecules assume an irregular path. (Less chance for stress cracking.) That's why you "stop drill" a hole at each end of a crack to stop it from spreading.
None of this is necessary in a recreational cruiser, at least not a coastal one, but the oval design has become part of the nautical "look," hence the door in your second photo.
A friend of mine who is a NA says that the arched doors on the interiors of yachts "actually do" have a benefit, though its a generally unperceived one. When people approach an arched doorway, they automatically center themselves in the middle of the doorway although they are not aware of doing so. Whether this is correct or arched doors are done for design effect is debatable. He says that along with spreading the loads (stress) evenly in the passageways of ships, (think war ships) and hatch sealing capabilities, aligning yourself up for going through the hatch (which is done subconsciously) is the main focus of the design .
*SeaHorse II wrote:....aligning yourself up for going through the hatch (which is done subconsciously) is the main focus of the design .
*SeaHorse II wrote:
Marin wrote:
*I assume this is because a rounded shape will hold pressure more reliably than a square-cornered shape.
This is true in a lot of design criteria. Molded plastic parts, fiberglass molds, etc. The molecules align themselves in a straightline pattern at any sharp corner whereas with a rounded (radius) corner the molecules assume an irregular path. (Less chance for stress cracking.) That's why you "stop drill" a hole at each end of a crack to stop it from spreading.
None of this is necessary in a recreational cruiser, at least not a coastal one, but the oval design has become part of the nautical "look," hence the door in your second photo.
A friend of mine who is a NA says that the arched doors on the interiors of yachts "actually do" have a benefit, though its a generally unperceived one. When people approach an arched doorway, they automatically center themselves in the middle of the doorway although they are not aware of doing so. Whether this is correct or arched doors are done for design effect is debatable. He says that along with spreading the loads (stress) evenly in the passageways of ships, (think war ships) and hatch sealing capabilities, aligning yourself up for going through the hatch (which is done subconsciously) is the main focus of the design .
*Architecturally, arched openings (over doors or otherwise) provide the strongest and best distributed vertical support for overhead weight and least flex during sheer pressures.* Quite good looking too!!Forkliftt wrote:
Why are most interior boat doors round on the top? An inquiring Admiral wants to know. They look great for sure- but is there a reason other than looks??
Marin, I just creamed my jeans looking at those pictures. *Wow, those shot are nice. *I'm going to work on the boat now. *I'm not waiting till Monday, thanks for setting me straight. **Marin wrote:
I suspect your second example is just for style. True watertight doors have rounded tops and bottoms and are set a few inches to a couple of feet off the floor. I assume this is because a rounded shape will hold pressure more reliably than a square-cornered shape. Remember the deHaviiland Comet, the first jet airliner? After they entered service several of them "exploded" at altitude. The cause was eventually found to be in the window design, which featured square or nearly square corners. The flexing of the fuselage due to the pressurizatin and depressurization of the cabin caused fatigue cracks to develop in the skin at the corners of some windows until the structure suddenly let go entirely under pressure and the plane disintegrated. The solution was to ovalize the window openings, which is why they are that way in today's planes.
Plus I would imagine it is easier to get a good watertight seal around a door with rounded corners or ends instead of having a sharp angle in the door seals at every corner.
None of this is necessary in a recreational cruiser, at least not a coastal one, but the oval design has become part of the nautical "look," hence the door in your second photo. If the curved top actually offered any real benefit, the door to the left of it would have this too. So it's just style.
I don't think the "flexing boat, sticking door" theory holds any water.* We've never had that problem on our boat. Here are two shots from my collection of PT photos that were taken on board the only totally restored and original Elco 80' PT boat in existance, a boat I've spent a fair amount of time on.* These were wood boats that were designed to travel at speeds up to 45 mph in the open ocean. Plenty of vibration and flexing I would say.* Where they needed a watertight door there was a rounded watertight door.* Where they needed a door but not a watertight one, the door was sharp-edged and square cornered.
First shot shows the watertight door into the crew head and shower area in the forepeak.* Second shot is a connecting door in the officer's quarters on the port side of the boat amidships.* The watertight door into the officer's area is visible in the bulkhead on the other side of the connecting door.
-- Edited by Marin on Sunday 13th of November 2011 02:20:02 PM
Looks like a need to read up on our aquatic birds. *Many thanks markpierce*