6lya stp coolers

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

SILENTKNIGHT

Senior Member
Joined
Oct 19, 2018
Messages
186
Location
United States
Vessel Name
STELLA DI MARE
Vessel Make
2006 MAINSHIP 34T
i have 1100 hrs on the single engine. 2006 mainship
I was inquiring on just opening up the end caps for inspection and if all appears clean i was going to just put new gaskets and re-seal after using a fresh water hose to spray thru? any sediment ?
1, Intercooler
2. heat exchanger
3. oil cooler- will antifreeze come out on these end cap removal?
4. tranny cooler - might just replace all together.

Also does anyone know what a mechanic would charge to do the same? @ $185 hr rate

i also will have mechanic do valve adjustment.:confused:
 
1. The intercooler also needs cleaning on the air side which can only be done by total disassembly.

2,3,4. These are all sea water cooled and end cap removal will work. Better if you circulate Barnacle Buster or similar to get any scale out.

Several thousand $$$.

David
 
On our boat I had to remove the intercooler to get at the oil cooler. Our boat has two engines. A single engine boat might have more room.
 
My mechanic charged $5000 to remove ,boil out, pressure check and replace the coolers in my twin yanmar 4lha
 

Latest posts

Back
Top Bottom