The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
-
-
Knot Salted replied to the thread Autopilot for a trawler.I hunt as well, and after ruining many headlight/flashlights, and trail cameras, not to mention all small accessories onboard our boat -... -
Knot Salted reacted to nveater's post in the thread Raymarine Evolution Autopilot Install with
Like.
So I just finished installing a Raymarine Evolution EV 150 auto pilot into my 1999 Mainship Pilot 30 and I thought I would share some of... -
Knot Salted replied to the thread Autopilot Installation.Hi ComoDave, I have an old failed PowerHelm A/P. Pump is good like yours. Thinking EV-100 or EV-150 on our 34 Californian. Any...
-
Knot Salted reacted to CaptTom's post in the thread PERKINS 6.354M mainfold/heatexchanger with Like.
Yes, I always wondered why both terms were tossed around, and which one I actually had. (Turns out it's the multi-cooler.) Thanks for...
-
That was not my exhaust but a photo of a Yanmar installation; mine is a Cummins and completely dry stacked. Never want a salt water...
-
Sorry Boomerang, but you don't get it... Wrap the exhaust with one of these blankets and your engine will be EASIER to work on...
-
You've got the "newer" "Dot 4" engine, e.g. 6.3544 vs 6.354. Those heat exchangers and manifolds shouldn't need to be custom made...
-
Knot Salted replied to the thread My dripless shaft is leaking.If lightly damaged/leaking, the carbon fiber tube (stationary) and stainless tensioning ring (spinning) can be pulled in drydock and...
-
I assume this is a PSS? Yes, you remove the little set screws, push it tighter, and then put in new set screws and tighten them down...
-
-
Loading…
-
Loading…