timb
Guru
- Joined
- Sep 12, 2017
- Messages
- 572
- Location
- usa
- Vessel Name
- true heading
- Vessel Make
- marine trader 38 dc
I have been searching for a thread on props sizes and hull clearances .I have a single engine full keel trawler with a 24" prop and only 1.5" clearance. I know I have seen this in another post but can't find it .
also I took out my drive saver until I do a shaft alignment after the boat is splashed . debating on leaving it out. I don't know how moving it an 1.5" toward the keel and away from the rudder will effect the boat. any advice is welcome.
also I took out my drive saver until I do a shaft alignment after the boat is splashed . debating on leaving it out. I don't know how moving it an 1.5" toward the keel and away from the rudder will effect the boat. any advice is welcome.