Suspecting that my Link 2000 is in the process of going TU, I have been exploring replacement options. On/off functions for the inverter/charger and voltage/current readings seem OK. The problem is I keep losing accumulated amp-hrs and then need to guess at SOC. Since I usually only run 40-50% capacility before charging, resting voltage does not help.
The LInk 2000 controls/reads 2 separate house banks of 550 amp-hrs each. All I have been able to find for battery monitors are single house bank monitors, some with the ability to do basic readings on a second (starter) battery. So, I am faced with using 2 separate devices with 2 read-outs to replace one compact read-out. Why does it seem as though this industry is going backwards??
The LInk 2000 controls/reads 2 separate house banks of 550 amp-hrs each. All I have been able to find for battery monitors are single house bank monitors, some with the ability to do basic readings on a second (starter) battery. So, I am faced with using 2 separate devices with 2 read-outs to replace one compact read-out. Why does it seem as though this industry is going backwards??