Thread Tools Search this Thread Display Modes
 
Old 02-06-2020, 09:57 AM   #1
Veteran Member
 
Flyguy1967's Avatar
 
City: PNW
Country: USA
Vessel Model: CHB Ponderosa 48
Join Date: Aug 2009
Posts: 56
Sold-Ford Lehman SP225 Parts

I have pulled my SP 225's and have all the parts ready to ship:

-Turbos (rebuilt by APD 2919)
-Heat Exchangers (New 2019)
-Injection Pump (Port one rebuilt (2019)
-Water pumps (and 2 spares)

Starboard engine overheated due to mechanic not bleeding system so rather then rebuild, I am repowering.

Let me know what you need.

Brent
Attached Thumbnails
Click image for larger version

Name:	Port Eng.jpg
Views:	58
Size:	146.8 KB
ID:	99089   Click image for larger version

Name:	Stbd Eng.jpg
Views:	59
Size:	156.6 KB
ID:	99090  
__________________
Advertisement

Flyguy1967 is offline  
Old 02-06-2020, 12:41 PM   #2
Senior Member
 
Redhook98's Avatar
 
City: Colonial Beach, VA
Country: US
Vessel Name: Tatoosh
Join Date: Jun 2019
Posts: 133
Any idea if the dual-belt pulleys and fancy valve covers will fit on a 120?
__________________

__________________
"Everything on your boat is broken.... You just don't know it yet."
Redhook98 is offline  
Old 02-06-2020, 01:05 PM   #3
Veteran Member
 
Flyguy1967's Avatar
 
City: PNW
Country: USA
Vessel Model: CHB Ponderosa 48
Join Date: Aug 2009
Posts: 56
Off hand I donít but I bet Brian at American Diesel can answer that.
Flyguy1967 is offline  
Old 02-08-2020, 09:54 PM   #4
Guru
 
Pete Meisinger's Avatar
 
City: Oconto, WI
Country: USA
Vessel Name: Best Alternative
Vessel Model: 36 Albin Aft Cabin
Join Date: Oct 2012
Posts: 1,145
I did the same thing to my 120. The petcock on the manifold was frozen and i didn't bleed the air out of the tube which runs down the starboard side of the engine. Fortunately I did not damage the engine, I shut it down pretty quickly and those old F.L.s are tough.

pete
Pete Meisinger is offline  
Old 02-08-2020, 09:56 PM   #5
Guru
 
Pete Meisinger's Avatar
 
City: Oconto, WI
Country: USA
Vessel Name: Best Alternative
Vessel Model: 36 Albin Aft Cabin
Join Date: Oct 2012
Posts: 1,145
If the gauges for the new engine are not comparable with the F.L. gauges I will take all four tachometers, oil pressure , amp and temp gauges.

Give me a call or pm

(715) 889-0485

pete
Pete Meisinger is offline  
Old 05-19-2020, 09:06 AM   #6
Newbie
 
City: Brier, WA
Country: USA
Join Date: May 2020
Posts: 2
SP225 spares

I am looking at a boat with a single SP225. I would be interested in the intercooler housing and manifolds from one of the engines. I will know in a week if this is the boat for us. Frankly, anything that is "Hard to find" so I have spares to keep in the garage. Maybe a head from the non-overheated engine if that can be shipped.


For that matter, what would a complete engine be worth? Depending where you are which I cannot see until I send this message.




I am in the Seattle area. 206-390-0610
Brier_John is offline  
Old 05-19-2020, 09:28 AM   #7
Veteran Member
 
Flyguy1967's Avatar
 
City: PNW
Country: USA
Vessel Model: CHB Ponderosa 48
Join Date: Aug 2009
Posts: 56
Hi John!

I sold/traded in my engines to Harbor Marine in Everett in exchange for a new reduction gear. They took the whole works so I would call them. I bet they still have all the bits. Good luck! Brent
__________________

Flyguy1967 is offline  
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





All times are GMT -5. The time now is 09:05 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012
×