Perkins ST6.3544M turbo parts

[IdleHour]

Hi all!
Mechanic slipped and fell and broke the exhaust flange/fitting (the exhaust elbow fits on to it) on the turbo on my port engine.
Anyone have an engine manual for it? ST6.3544M
I’m thinking this is going to be an expensive impeller change.

 

[C lectric]

You might also try Trans Atlantic Diesel . Get the specific engine engine serial number
and model and phone them and ask.

Trans Atlantic Diesels | Perkins Diesel Engines | Perkins Engine Parts | Cummins Diesel Engines

 

[jleonard]

Can you post a picture of the broken part?
Some of those are common to automotive.
There is a turbocharger repair shop in Albany. Someone on here posted about a few years ago. I don't remember the name but Google is your friend.

 

[Turtle Blues]

Second the vote for TAD. They are the Perkins marine go to on this side of the pond. They will send you the parts diagrams and if NLA new are a good source for used and reconditioned parts.

 

[IdleHour]

Second the vote for TAD. They are the Perkins marine go to on this side of the pond. They will send you the parts diagrams and if NLA new are a good source for used and reconditioned parts.

Thanks!

Pics here attached I think

 

[IdleHour]

Can you post a picture of the broken part?
Some of those are common to automotive.
There is a turbocharger repair shop in Albany. Someone on here posted about a few years ago. I don't remember the name but Google is your friend.

Just posted, thanks!

 

[IdleHour]

You might also try Trans Atlantic Diesel . Get the specific engine engine serial number
and model and phone them and ask.

Trans Atlantic Diesels | Perkins Diesel Engines | Perkins Engine Parts | Cummins Diesel Engines

Thank you!

 

[Dwk]

I’m not 100% certain this is the part BUT if it is TAD has new manufactured out of of stainless steel. I replaced one this winter that was bad, leaking exhaust at the riser connection. They come with a blanket. You will also need the stainless rings that mount between the riser connection and turbo side connection and 2 new clamps.

 

[IdleHour]

I’m not 100% certain this is the part BUT if it is TAD has new manufactured out of of stainless steel. I replaced one this winter that was bad, leaking exhaust at the riser connection. They come with a blanket. You will also need the stainless rings that mount between the riser connection and turbo side connection and 2 new clamps.

Awesome thanks!!
The flange ring broke that the elbow clamps to.
What did that run you, ballpark?

 

[Dwk]

I believe the entire package, was approx $900, the “turbo pot” was $650.I distorted the clamps when removing so new were needed and new stainless rings are necessary. I purchased these in Feb 2022. The old pot deteriorated at the exhaust flange. Simple repair but costly.

 

[IdleHour]

I believe the entire package, was approx $900, the “turbo pot” was $650.I distorted the clamps when removing so new were needed and new stainless rings are necessary. I purchased these in Feb 2022. The old pot deteriorated at the exhaust flange. Simple repair but costly.

Yep that’s the part! Really appreciate it. Thanks much for the info!

 

[Dwk]

IdleHour,BTW ours is a Perkins T6.354. I think the turbo pots are all the same.TAD will put you on the correct part,they speak fluent Perkins.