I have networked E80's with a DSM 30 reading off of an inhaul transducer. It is networked through a Highspeed switch. On this network is Radar, GPS, and an auto pilot with a wireless remote. The system works good. Untill, while waiting for reduced current*at Seymour Narrows, I picked up my anchor, and while motoring out I noticed my Raymarine chartplotter showed no bottom. I didn't notice this right away because I have an independent Lowrance depth sounder I use also.
*
So the Raymarine Chart ploter shows no bottom even though the little icon shows the transponder is working. But when I get to Campell river later on it works. But it works only in shallow depths under 60 feet.
Has any one experienced Raymarine sounder problems when working with the Raymarine E series. My chartplotters have been updated to version 5.52 and my DSM 30 to version 4.11.
*
*
*
So the Raymarine Chart ploter shows no bottom even though the little icon shows the transponder is working. But when I get to Campell river later on it works. But it works only in shallow depths under 60 feet.
Has any one experienced Raymarine sounder problems when working with the Raymarine E series. My chartplotters have been updated to version 5.52 and my DSM 30 to version 4.11.
*
*