Bmarler

It is working, but at a reduced capacity. The idea behind those is that the porosity allows more exposed surface area, making the plate...

Maybe something like this? 3/4" Sch 80 PVC Van Stone Slip Flange 854-007 Plumbing flanges are usually standard sizes, so the pipe size...

I’d be checking the steering or any other hydraulic system onboard. Those fluids can be that color. Some can also absorb small amounts...

Agree. I would have widened the crack, inject epoxy, clamp overnight. No fastener.

Agree with Fleming, all too many surveyors over emphasize the use of moisture meters as the know all, end all. It’s not an exact...

The 1/2 red belt would likely be the choice if you have 1/2 belts now. They take a little effort to put together but when you get the...

I’d rather have the 7 inch mfd and keep the autopilot head. I use a 7inch for my main display and like it just fine. I run 2 displays so...

I use only plastic or bronze fittings on black water plumbing. Preferably plastic. No corrosion. I’d be replacing that patched tank...

Raptor deck was mentioned previously, I use a similar product in mine. It’s soft under foot and doesn’t seem to heat up too much in the...

Also, that thing you’re doing with the battery switch?stop it. Totally defeating the purpose of the isolator. The switch should be used...

I use link belts on certain equipment applications. It’s very good stuff, runs very smooth. I would have no problem running my...

100% of my manual steering is done with the autopilot remote follow up lever. If the rest was done through a mfd I wouldn’t have a issue...

I’d second that guess. There’s a gauge that has a red zone at the upper end of the range. That should be black or grey water.

Ok, good luck with it. Hopefully it’ll last as long as you need it to. But, as far as building a jig goes, it’s not that tough. I’ve...

You might attach a limiter to the scupper to keep it from opening more than 45 or 50 degrees. Either a lanyard from the bottom or a...