mvweebles
Guru
- Joined
- Mar 21, 2019
- Messages
- 7,288
- Location
- United States
- Vessel Name
- Weebles
- Vessel Make
- 1970 Willard 36 Trawler
Looking for source for exhaust insulation for dry section of my 3-inch exhaust coming off manifold of my Perkins 4.236. Steve D's article mentions using a blanket or a hard-coat insulation. Unfortunately, I do not have a pic of my exact exhaust, but configuration is very similar to the attached pic with 'silver' blanket.
Any thoughts on sourcing these insulation materials? Steve D likes the hard-coat (attached pic with black blanket), but the removable blanket (silver pic) would be fine too. Current fiberglass wrap gets pretty dang hot and difficult to work nearby.
Thoughts?
Peter
https://stevedmarineconsulting.com/wp-content/uploads/2014/03/ExhaustSystems170-FINAL.pdf
Any thoughts on sourcing these insulation materials? Steve D likes the hard-coat (attached pic with black blanket), but the removable blanket (silver pic) would be fine too. Current fiberglass wrap gets pretty dang hot and difficult to work nearby.
Thoughts?
Peter
https://stevedmarineconsulting.com/wp-content/uploads/2014/03/ExhaustSystems170-FINAL.pdf