Aussie Mike
Member
G'Day all
I have a 1977 Clipper 30 which has teak windows fitted all around.
I'm keen to try and remove all the old sealant/chalking myself from around the inner and outer exterior frames to stop small amounts of water getting into the bilge after heavy rain.
I know I have to dig out all the old sealant before applying new sealant but was looking for any tips or tricks on how to do the job properly.
Also looking for recommendations on what sealant/chalking I should use once all the old sealant is removed.
Here is a link to some images of the windows.
https://photos.app.goo.gl/9F2tYtqvA82dz3pB8
Looking forward to your feedback
Thanks in advance
Mike
I have a 1977 Clipper 30 which has teak windows fitted all around.
I'm keen to try and remove all the old sealant/chalking myself from around the inner and outer exterior frames to stop small amounts of water getting into the bilge after heavy rain.
I know I have to dig out all the old sealant before applying new sealant but was looking for any tips or tricks on how to do the job properly.
Also looking for recommendations on what sealant/chalking I should use once all the old sealant is removed.
Here is a link to some images of the windows.
https://photos.app.goo.gl/9F2tYtqvA82dz3pB8
Looking forward to your feedback
Thanks in advance
Mike