Ford Lehman 80hp Wiring Diagram

[Dido]

Dear all, my sailboat is equipped with an 80hp Ford Lehman and have two stations, recently I removed the engine for maintenance and I need to rewire the engine, each station have a tachometer, oil pressure, temp pressure and a battery gauges. I looked over the internet and also contacted American diesel but without success in getting a wiring diagram. Your help is appreciated

Thank you

 

[High Wire]

Welcome aboard!

 

[Comodave]

Welcome aboard.

 

[Max1]

There were already a few posts on here about wiring for a 120. I downloaded the images and made notes and used in on my engine when I worked on it.
Not sure if its the same as an 80.
I will try to find the post and link it here

 

[Dido]

Thank you, this is a great place to meet people and get useful information

 

[Dido]

Thank you Max1, I believe the 120 and the 80 hp have the same electrical components, if you find the link to the electric diagram that will be very helpful

 

[catalinajack]

The wiring of the gauges and tachs on my two Lehmans were daisy-chained from the lower to the upper helms. I think you can just hook up the feeds as they were. In fact, your oil pressure and temp guages must be daisy-chained as the senders will undoubtedly be dual station senders.