Reply
 
Thread Tools Display Modes
 
Old 04-12-2015, 08:28 PM   #1
Guru
 
City: Full Time Cruising East Coast
Country: USA
Vessel Name: Meridian
Vessel Model: Krogen-42
Join Date: Aug 2011
Posts: 755
Morse Twin-S control head

Is there anything I need to look out for when disassembling the control head to replace the cables.
__________________
Advertisement

__________________
-------------------------
Terry
Meridian
KK-42097
meridian is offline   Reply With Quote
Old 04-12-2015, 08:30 PM   #2
Guru
 
Sailor of Fortune's Avatar
 
City: Saint Augustine, Fl.
Country: Port of St Augustine ,FL
Join Date: Sep 2009
Posts: 1,950
Don't lose the small retaining screws and e clips.
__________________

Sailor of Fortune is online now   Reply With Quote
Old 04-12-2015, 10:07 PM   #3
Guru
 
kolive's Avatar
 
City: Vashon Island, WA
Country: USA
Vessel Name: Island Breeze
Vessel Model: 1974 Grand Banks 36-427
Join Date: Sep 2011
Posts: 582
Send a message via Skype™ to kolive
I would recommend taking a photo of every step from before the new cables to after you install them. It really helps with the memory of how they were adjusted.

Also the pdf manual for your model of morse Control is probably out there to download. Here is one I refer to. Good instructions on any adjusting to do if needed and great illustrations.

http://www.equipment.ath.cx/instrume...3%20Manual.pdf
__________________
Keith Olive
1974 Grand Banks 36-427
Vashon Island, WA
kolive is offline   Reply With Quote
Old 04-14-2015, 05:14 PM   #4
Guru
 
Shoalwaters's Avatar
 
City: Rodney Bay Lagoon
Country: St. Lucia, West Indies
Vessel Name: "Dragon Lady"
Vessel Model: DeFever 41
Join Date: Feb 2008
Posts: 681
All good advice above.

I have Teleflex/Morse NB levers and I replaced the throttle and gear cables to both stations. Although the internals are somewhat different from yours, the same procedure applies. You may find the description in the link below useful. The little ferrule I made to join the old and new cables made threading the new cables a simple job. Good luck.

http://www.trawlerforum.com/forums/s6/renewing-engine-control-cables-8186.html
__________________
Mike
If all else fails, read the instructions
If it ain't broke, don't fix it
Shoalwaters is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





All times are GMT -5. The time now is 06:57 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012