Trawler Forum

Trawler Forum (http://www.trawlerforum.com/forums/)
-   General Discussion (http://www.trawlerforum.com/forums/s3/)
-   -   Passage Maker? (http://www.trawlerforum.com/forums/s3/passage-maker-510.html)

Doc 10-11-2007 04:14 PM

Passage Maker?
 
I have not been able to get into PassageMaker all day. Do I need to empty my cache or has anyone else had the problem?

Carey 10-11-2007 04:56 PM

RE: Passage Maker?
 
It's not you, it's Passagemaker. The site was slow this morning, and now it won't open all the way.

Phil Fill 10-11-2007 08:55 PM

RE: Passage Maker?
 
I been having withdrawals and need a fix, so thought I would banter,wander and hassel this site for a while. I recongnize most of the names so it's sort of like the PMM.* *Are we allow to mention PMM?

I saw Bill Parlator log on just before it went slow.* In the past there was talk about dropping the chat deck, so we will see.* Heck this may become the primary trawler site.* Anyway nice to know where*an alternative fix, when needed.*

rednev 10-11-2007 10:40 PM

RE: Passage Maker?
 
** now that phil fill is here this site is complete
** as for passagemaker since the last upgrade it has become
** unworkable for me
**

boogiediver 10-11-2007 11:04 PM

Passage Maker?
 
Yeah, nice to have an alternative venue and to see you all gathering here! Whenever I can, I try to log on for a few minutes at lunch time, and then again before leaving the office in the evening (Hong Kong time). It turns out that those are the worst times for PMM. So, now I check PMM for a nibble in the morning, and then come here for lunch and dinner!

Baker 10-12-2007 03:21 AM

Passage Maker?
 
Welcome to all of you PMM folks. We hope you find this site fast enough and easy to use and we do hope it becomes the primary trawler site!!!

KMA 10-12-2007 05:32 AM

Passage Maker?
 
The problem with PMM appears to be their "adserver" (adserver.passagemaker.com). Until they fix this, they've lost me.

Doc 10-12-2007 06:03 AM

Passage Maker?
 
All we need to be complete now is FF.

Codger2 10-12-2007 01:48 PM

RE: Passage Maker?
 
Hey chuck!

Great to see you over here! We're pretty loyal to Passagemaker huh? Just goes to show you that if you don't constantly improve your product, you are going to lose customers.

Walt

Phil Fill 10-12-2007 03:23 PM

RE: Passage Maker?
 
I see*PMM is back up and running at a good speed.* However,*I will try to divide up the posts.* Great to see some of the same people on both of the sites, and looking forward to gettn to know the new names/pictures.

So let's see if that little picture come up?

Doc 10-12-2007 04:08 PM

Passage Maker?
 
P/F,

Plese don't devide up your pists. I chek this one on evn days and the other one on odd dais.

FF 10-13-2007 04:00 AM

Passage Maker?
 
Guess enough folks started to Bail on PM that they cut back on the adserv garbage so the board will load .

Here in the FL Hurricane Hole wilderness Ortona (were not nowhere , but you CAN see it from our porch) a 41kb phone line is considered FAST!

As this is a "moderated" board , we will see how long I get to stay?

FF

Forkliftt 10-14-2007 08:32 PM

RE: Passage Maker?
 
Anybody able to get on PMM tonight? When I try I get DotNetNuke Upgrade error....* Whats that mean?
Steve

Gene 10-14-2007 08:48 PM

Passage Maker?
 
Nope, it's been down for a few hours now.

FF 10-17-2007 04:24 AM

Passage Maker?
 
PM is broke again at 5-7AM today.

5 to 10 min of yard work , and adserver is still loading on return.

The only way to use PM is with a far more tolerant view of having your time waisted.

Sorry but an all day event is not in my cards.

Perhaps folks with better than dial up can get the dozensand dozens of adds , and use their spot ?

FF

Phil Fill 10-20-2007 08:11 AM

RE: Passage Maker?
 
I see PMM is down again or having trouble?* We just got a new Verizon Broad Band up dated PC card and we keep getting an error message.* Yesterday at work on a Verizon land broad band could not connect.* The card seems to work great for other internet stuff.

*
So are other people having trouble or is it our new card or PMM?* ***Anyway looks like this site is stuck with me as I need a daily fix.* (-;

*

*

Carey 10-20-2007 10:20 AM

RE: Passage Maker?
 
I haven't tried today, but yesterday it was to the point of taking a several minutes to process each click. Eventually, I got all the way in, and of course discovered that since it was so slow, there were hardly any postings. What a waste. I'll stay here as my primary forum.

Keith 10-21-2007 06:11 AM

Passage Maker?
 
Tried to log in there this morning for the first time in days.... got the blue screen of death. "Down for scheduled maintenance".

-- Edited by Keith at 08:12, 2007-10-21

-- Edited by Keith at 08:23, 2007-10-21

boogiediver 10-22-2007 04:20 AM

Passage Maker?
 
Yeah, things really aren't so groovy anymore at PMM. The site's down (everyone knows that), the magazine simply hasn't hit the shelves here in Hong Kong for the last 3 months, and no one at PMM wants to answer my questions about a possible subscription. Not good.

Can anyone answer me this? How long does it take for new issues to be delivered internationally? If the answer is "less than 4 weeks from publishing date", then I want to subscribe. If the answer is "more than 4 weeks", then... ummm, I'll probably still have to subscribe!

Doc 10-22-2007 05:34 AM

Passage Maker?
 
I have been to West Marine twice...latest Saturday...looking for the magazine issue that the web site is/was showing. No luck. They still have the issue that features a Brand X tug on the cover.

-- Edited by Doc at 07:37, 2007-10-22

-- Edited by Doc at 07:37, 2007-10-22


All times are GMT -5. The time now is 06:27 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012