The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
BruceK

Latest activity Postings About

    • BruceK
      How was it performing during the remaining retrieve function? If the motor is still performing well it could be control functions that...
    • BruceK
      BruceK replied to the thread Power for ER blowers.
      If the engine(s) are running when the blowers are, and voltage drops to 11 the alternators do not provide the amps being consumed. It...
    • BruceK
      BruceK replied to the thread Cruising for Disabled Boaters.
      Seeking advice is good, don`t worry about thread location. I had peripheral neuropathy in the lower legs briefly, due to a rare...
    • BruceK
      BruceK replied to the thread Willard 50.
      Didn`t our late member FF have one of those? Great interior fitout.
    • BruceK
      There are sit on type kayaks sold as fishing kayaks which are wider, more stable, but still single hull. My partner chose one, it`s not...
    • BruceK
      BruceK replied to the thread Sticker shock AGAIN!.
      But consider the dental consequences of the 5c candy bars. New heat exchanger for the 7KW Onan cost just short of 2K AUD. Ouch.
    • BruceK
      BruceK replied to the thread Ford Lehman 120 seized piston.
      I had Lehmans in a previous boat. They silt up, impeding coolant movement, around no.6 especially but there could be other causes. I had...
    • BruceK
      BruceK replied to the thread Music favs.
      This is Roberta Flack`s weirdly named "Uh Uh Ooh Ooh Look Out (Here it Comes)" Not so weird, it`s the tale of a dumping phone call. Well...
    • BruceK
      BruceK replied to the thread Humor.
      • 1715388439611.png
    • BruceK
      BruceK replied to the thread Liability Insurance at BC Marinas.
      Unremarkable. Usual marina requirement here is 10M.
    • BruceK
      BruceK replied to the thread Glue for Marelon?.
      Unfortunately photo does not depict crack. Suggest you research JB Weld 2 part epoxy, I used it to repair a plastic part on an outboard...
    • BruceK
      BruceK replied to the thread Decks.
      There are multiple core materials. My previous 1981 Island Gypsy, in many ways a GB clone, had (original) foam cored decks. You`ll be...
    • BruceK
      My home dehumidifier sized for a large room is effective but does raise room temperature. In our climate we don`t need one on the boat.
    • BruceK
      BruceK replied to the thread Cockpit Winches.
      Cockpit winches are a great idea for your locking needs. The lack of locks here suggests Maritimo may not have had them in mind for...
    • BruceK
      BruceK replied to the thread Leaking hatch.
      If water is entering between the acrylic glass and the frame, it should be possible to seal the gap between the two without removing the...
  • Loading…
  • Loading…
Back
Top Bottom