Where is the Morse Control Unit in 2004 Nordic Tug 32?

[bernardi2004]

I have a 2004 Nordic tug 32. It uses the Morse KE-4a electronic control system. This system has 3 modules:
1. Control head (the control you hold to shift and apply throttle).
2. Actuator operates the cables to the marine gear and to the throttle.
3. Control unit is the brains.

My challenge: The Control Head (helm) and the Actuator (engine compartment) are both in plain sight, but for the life of me I have not traced where the Control Unit is located. Where is it?

Thanks!
vessel Bernardi

 

[C lectric]

Have you contacted the boat mfgr? They may/should be able to tell you or at least give some good guidance of where to look.

 

[bernardi2004]

Have you contacted the boat mfgr? They may/should be able to tell you or at least give some good guidance of where to look.

Tried that. Other than Sales, Nordic is very hard to reach.

 

[bernardi2004]

I have a 2004 Nordic tug 32. It uses the Morse KE-4a electronic control system. This system has 3 modules:
1. Control head (the control you hold to shift and apply throttle).
2. Actuator operates the cables to the marine gear and to the throttle.
3. Control unit is the brains.

My challenge: The Control Head (helm) and the Actuator (engine compartment) are both in plain sight, but for the life of me I have not traced where the Control Unit is located. Where is it?

Thanks!
vessel Bernardi

Solved my own problem. The Control Unit is behind the DC breaker panel.