W-H Autopilots Inc. Seattle

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

Filbert

Member
Joined
Nov 18, 2019
Messages
8
Location
Usa
Vessel Name
Pelican V
Vessel Make
‘81 49 Defevber RPH
I need to add a rudder indicator to the flybridge of my 49 DeFever RPH. The existing autopilot is a W-H Autopilots Inc. that’s been long discontinued. The system is a stand alone unit (not part of the autopilot). Does anyone know anything about this system and whether or not I should even mess with trying to find a second unit (or if I can even add one to the existing system) or should I just install a new multi display unit? If new, I’ll probably go with something that N2K compatible. Any recommendations?
 
Years ago I had Wil at W-H adapt a Robertson rudder angle indicator to work with my W-H autopilot. It plugs into the W-H processor box. I replaced the autopilot so the old one including the RAI is just sitting in a box. If you want the RAI I'll just put it in a box and mail it to you. PM me your address if interested.
 
I know it's a bit late to be joining this thread but my enquiry is about the W-H Autopilot. I am trying to find the manufacturer and part numbers for the 9 pin plugs used on this Autopilot. It is a very specific pin arrangement, not a simple equidistant circular arrangement....see attached pic.
I need both the male and female halves and joiner if possible.
Plugs like this are normally manufactured by third parties and are used by companies like W-H. Somebody, some company made these plugs, does anyone know?
Any assistance will be greatly appreciated.
 

Attachments

  • 20241030_191945.jpg
    20241030_191945.jpg
    82.1 KB · Views: 12
  • 20240918_103058.jpg
    20240918_103058.jpg
    71.6 KB · Views: 11
You might try Google image search. Kinda of hit-or-miss but sometimes works remarkably well.
 
I had a W-H autopilot and at one point figured out who made those connectors. I forget who it was but it just took a little detective work using the numbers on the connectors and some googling. As an alternative you can just cut the connector out and use a terminal strip
 
ebay has some 9 pin din plugs and sockets.
Some places I have used for odd electronic parts:
Found on Amazon:
 

Attachments

  • 9 pin.jpg
    9 pin.jpg
    16.1 KB · Views: 8
  • 9 pin 2.jpg
    9 pin 2.jpg
    42.1 KB · Views: 9
Back
Top Bottom