HeartWarrior
Veteran Member
- Joined
- Sep 8, 2019
- Messages
- 26
- Location
- United States
- Vessel Name
- Heart Warrior
- Vessel Make
- 1988 Island Gypsy 40
I have been working for the past year to upgrade and "clean up" my new to me 1988 IG 40. The current battery setup is simply 2 8D 200ah house/starter batteries(old school wet cell), one for each engine. It has a simple Perko 1/2/both switch, which is only used for the 2 house / starting batteries. The generator has its own group 31 starting battery (agm).
I am looking to replace my current 40 amp 3 bank charger with something new but not break the bank. The current charger is original.
Based on all my study, I see that everything I read says that for group 8D wet cells you need to jump up to the more expensive battery chargers. I'm just wondering if anyone is using the lower cost units at the same amperage (say 40amp output) to charge there batteries? I have new 70AMP alternators on each of the engines which is more than enough to keep the batteries at a full charge.
Thanks for any input or manufacture type recomendations.
I am looking to replace my current 40 amp 3 bank charger with something new but not break the bank. The current charger is original.
Based on all my study, I see that everything I read says that for group 8D wet cells you need to jump up to the more expensive battery chargers. I'm just wondering if anyone is using the lower cost units at the same amperage (say 40amp output) to charge there batteries? I have new 70AMP alternators on each of the engines which is more than enough to keep the batteries at a full charge.
Thanks for any input or manufacture type recomendations.