My Vacuflush head spits at me!

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
quinsky

quinsky

Veteran Member
Joined
Jan 13, 2019
Messages
53
Location
USA
Vessel Name
Noah Genda
Vessel Make
DeFever 50 CPMY
I have a vacuflush head that frequently splashes back when it's flushed, often times landing on the floor, wall, or me. Fortunately it only splashes liquid waste but still pretty disgusting. The higher the fluid level in the bowl, the more likely it is to splashback. Anyone know a cure for this? (Besides closing the lid). Is the vacuum pressure too high. I read where the pressure switch should not be adjusted.
 
(It appears that Ted has confused a VacuFlush toilet with a clothes washer)

I suspect this is a problem caused by using too little flush water, resulting in a buildup of solids or TP in the line to the vacuum tank. VacuFlush is one of the few toilets in which you can use a plunger without damaging anything. Try using one with about a half bowl of water and a little dishwashing liquid (Dawn is good).
And from now on, keep the pedal down at least 3 full seconds after urine only...7-10 seconds for solid waste in at least 1/3 bowl of water. The flush water volume is too wimpy to fill the hoses, so it doesn't rinse them out. So flush a full bowl of water daily last thing before you turn in for the night.

I've written a piece I call "VacuFlush 101" that explains how it works (many owners think they do, but actually don't) and how much water it really needs to prevent at least 90% of problems. I'll be glad to send it you--and anyone else who wants it--if you'll send me an email (no way to attach anything to a post or a PM)...I can attach it to a reply.

--Peggie
peggie.hall@gmail.com
 
Last edited:
HeadMistress said:
(It appears that Ted has confused a VacuFlush toilet with a clothes washer)

I suspect this is a problem caused by using too little flush water, resulting in a buildup of solids or TP in the line to the vacuum tank. VacuFlush is one of the few toilets in which you can use a plunger without damaging anything. Try using one with about a half bowl of water and a little dishwashing liquid (Dawn is good).
And from now on, keep the pedal down at least 3 full seconds after urine only...7-10 seconds for solid waste in at least 1/3 bowl of water. The flush water volume is too wimpy to fill the hoses, so it doesn't rinse them out. So flush a full bowl of water daily last thing before you turn in for the night.

I've written a piece I call "VacuFlush 101" that explains how it works (many owners think they do, but actually don't) and how much water it really needs to prevent at least 90% of problems. I'll be glad to send it you--and anyone else who wants it--if you'll send me an email (no way to attach anything to a post or a PM)...I can attach it to a reply.

--Peggie
peggie.hall@gmail.com
Click to expand...
Peggy, Thanks. My head has an electric flush. I guess I can put it in service mode to use the plunger.
 
I see this with vacuflush quite often. Might have something to do with the way the waste drops into the cavity below the flush ball.
I always close the lid on a toilet before flushing, so didn’t really bother me.
Maybe try a slower pedal action and see if it helps.
 
Thanks. My toilet has an electric flush so I can't adjust the flush speed.
 
quinsky said:
Peggy, Thanks. My head has an electric flush. I guess I can put it in service mode to use the plunger.
Click to expand...
So you have the wall mounted flush button instead of the pedal? You should be able to keep the button down longer to add more water to the flush. And you should always bring water into the bowl ahead of solids.
And fwiw, VacuFlush owners account for about 90% of toilet problem posts on the net...and 99% of those are the result of using too little flush water. Yes, it CAN use "as little as 1 pint flush water" but only for urine without any TP. Anything more requires about the same amount of flush water as macerating electric toilets to prevent problems.

--Peggie
 
HeadMistress said:
(It appears that Ted has confused a VacuFlush toilet with a clothes washer)

I suspect this is a problem caused by using too little flush water, resulting in a buildup of solids or TP in the line to the vacuum tank. VacuFlush is one of the few toilets in which you can use a plunger without damaging anything. Try using one with about a half bowl of water and a little dishwashing liquid (Dawn is good).
And from now on, keep the pedal down at least 3 full seconds after urine only...7-10 seconds for solid waste in at least 1/3 bowl of water. The flush water volume is too wimpy to fill the hoses, so it doesn't rinse them out. So flush a full bowl of water daily last thing before you turn in for the night.

I've written a piece I call "VacuFlush 101" that explains how it works (many owners think they do, but actually don't) and how much water it really needs to prevent at least 90% of problems. I'll be glad to send it you--and anyone else who wants it--if you'll send me an email (no way to attach anything to a post or a PM)...I can attach it to a reply.

--Peggie
peggie.hall@gmail.com
Click to expand...
As the "HeadMaster" on Liberty Hound I would be interested in reading your article on VacuFlush 101.
Bruce
 
We had this problem when we had Vacuflush toilets. Resolved by removing the discharge hose that runs to the VG tank and banging them on the dock. Over time they got calcified and restricted, likely by not flushing enough water.
 
We fixed the same issue by replacing the old discharge hose (which resembled a 90% clogged artery!) with new Saniflex hose. Voila!
 
I’m laughing, as I’ve suffered with VC heads many times. Take Peggy’s advice….more flush water. I am sure there is a whole cottage industry on Florida that services VC heads.
1736804210462.png
 
quinsky said:
I have a vacuflush head that frequently splashes back when it's flushed, often times landing on the floor, wall, or me. Fortunately it only splashes liquid waste but still pretty disgusting. The higher the fluid level in the bowl, the more likely it is to splashback. Anyone know a cure for this? (Besides closing the lid). Is the vacuum pressure too high. I read where the pressure switch should not be adjusted.
Click to expand...
Close the lid before flushing Easy pleasie
 
HeadMistress said:
(It appears that Ted has confused a VacuFlush toilet with a clothes washer)

I suspect this is a problem caused by using too little flush water, resulting in a buildup of solids or TP in the line to the vacuum tank. VacuFlush is one of the few toilets in which you can use a plunger without damaging anything. Try using one with about a half bowl of water and a little dishwashing liquid (Dawn is good).
And from now on, keep the pedal down at least 3 full seconds after urine only...7-10 seconds for solid waste in at least 1/3 bowl of water. The flush water volume is too wimpy to fill the hoses, so it doesn't rinse them out. So flush a full bowl of water daily last thing before you turn in for the night.

I've written a piece I call "VacuFlush 101" that explains how it works (many owners think they do, but actually don't) and how much water it really needs to prevent at least 90% of problems. I'll be glad to send it you--and anyone else who wants it--if you'll send me an email (no way to attach anything to a post or a PM)...I can attach it to a reply.

--Peggie
peggie.hall@gmail.com
Click to expand...
I had no idea there were this many members who have VF toilets and would want my "VacuFlush 101" piece! I THINK I've replied with it to everyone who emailed me (my inbox is buried in political junk so I might have accidentally deleted a couple in purging them), so please send me a new email if you haven't received it, or just decided you want it.

--Peggie
peggie.hall@gmail.com
 
My Marine Elegance head has never spit at me, as a matter of fact I have never had to do any maintenance on them. No financial interest in them, just an extremely satisfied customer.
 
quinsky said:
I have a vacuflush head that frequently splashes back when it's flushed, often times landing on the floor, wall, or me. Fortunately it only splashes liquid waste but still pretty disgusting. The higher the fluid level in the bowl, the more likely it is to splashback. Anyone know a cure for this? (Besides closing the lid). Is the vacuum pressure too high. I read where the pressure switch should not be adjusted.
Click to expand...
please call us at 856-825-4900 we'd be happy to help you. Raritan customer service
 
You must log in or register to reply here.

Similar threads

GrandWood
Dometic VacuFlush head, my first dive into troubleshooting
Replies
21
Views
4K
NCheaven
NCheaven
PhilPB
FOR SALE: 1983 Mainship 34' MKlll - $32,000 - Palm Beach County, Fl
Replies
20
Views
4K
PhilPB
PhilPB
thead
Kadey Krogen 42PH
Replies
5
Views
4K
thead
thead
drb1025
One more VacuFlush issue
Replies
12
Views
1K
mike66
mike66
Nick F
Installation of a Dometic Sealand M28-711 Marine Gravity Toilet
Replies
22
Views
6K
ronobrien
R

Latest posts

Back
Top Bottom