Gulf Comanche
Guru
- Joined
- Dec 16, 2007
- Messages
- 1,049
- Location
- U.S.A.
- Vessel Name
- Old School
- Vessel Make
- 38' Trawler custom built by Hike Metal Products
I have not changed my fuel filters in almost 2 years; no problems, no water seen in the Racor, the gauge on the filter bracket shows below 10" when running. I would like to change them just to be on the safe side, but will I have to crack the injector lines while cranking? Or is this no big deal. Since I've never done it befor I need a little advise. Engine is a Perkins 4-236, pics of the filter setup below. The bracket I built has*Wix & Racor filters, and there is a Cav on the side of the engine block. Thanks.
Mike
Baton Rouge
Mike
Baton Rouge