For Sale: dAISy 2+ dual-channel AIS Receiver

[AnsleyS]

[FONT=&quot]I have upgraded my system to NMEA2000 so this is for sale.[/FONT]
[FONT=&quot]
[/FONT]
[FONT=&quot]$85 and shipping from Maine[/FONT]
[FONT=&quot]
[/FONT]
[FONT=&quot]dAISy 2+ dual-channel AIS Receiver with NMEA 0183 output[/FONT]
[FONT=&quot]
[/FONT]

[FONT=&quot]This AIS receiver is built for boaters. Compact, robust, and with all the interfaces you need. Thanks to its two-channel design, the dAISy 2+ receives about 40% more messages than the cheaper single-channel dAISy. This improves acquisition time and update rate of AIS targets, while range is comparable for both models.[/FONT]
[FONT=&quot]Specification[/FONT]

• [FONT=&quot]Dual channel receiver[/FONT]
• [FONT=&quot]Receiving on channel A (161.975 MHz) and B (162.025 MHz) simultaneously[/FONT]
• [FONT=&quot]38400 baud serial output over USB in industry standard NMEA format (AIVDM)[/FONT]
• [FONT=&quot]NMEA 0183 output at 4800, 9600 or 38400 baud for connection to chart plotters[/FONT]
• [FONT=&quot]Auxiliary TTL serial output for connection to other devices[/FONT]
• [FONT=&quot]BNC connector for 50 Ohm VHF antenna (antenna not included)[/FONT]
• [FONT=&quot]Mini-USB connector for data and power (3ft USB cable included)[/FONT]
• [FONT=&quot]5mm pitch terminal block for NMEA (matching plug with screw terminals included)[/FONT]
• [FONT=&quot]Can be powered over USB or from a 12-36V DC power source[/FONT]
• [FONT=&quot]Low power consumption, less than 500mW in receive mode (<100mA at 5V, <40mA at 12V)[/FONT]
• [FONT=&quot]Very robust aluminum enclosure with mounting holes, size: 105 x 80 x 28mm[/FONT]
• [FONT=&quot]Made in the USA[/FONT]

[FONT=&quot]Includes:[/FONT]
[FONT=&quot] [/FONT]
[FONT=&quot]AIS over WiFi with the DT-06 WiFi module
The auxiliary serial port is pin-compatible with the inexpensive DT-06 WiFi module. With the module,
dAISy 2+ can make data available wirelessly to mobile devices like laptops, tablets and smartphones.[/FONT]
[FONT=&quot][/FONT]