SDTugs
Veteran Member
Good day,
I’m trying to reimagine my autopilot system. What I ended up with was a Nav Pilot 300 and a Comnav CT4 motor controller to my vintage wood freeman 531 pump unit being driven by a 521a pump.
What I have run into is during the rudder test portion of the set up the pilot swing at the rudder back and forth at various angles and speeds. Once it’s gets to the starboard rudder limit it keeps going until the pump dead heads and blows the fuse on the Comnav CT3.
Has anyone run into this problem, or had any experience with a Furuno NavPilot 300 and a Comnav controller.
Thank you.
I’m trying to reimagine my autopilot system. What I ended up with was a Nav Pilot 300 and a Comnav CT4 motor controller to my vintage wood freeman 531 pump unit being driven by a 521a pump.
What I have run into is during the rudder test portion of the set up the pilot swing at the rudder back and forth at various angles and speeds. Once it’s gets to the starboard rudder limit it keeps going until the pump dead heads and blows the fuse on the Comnav CT3.
Has anyone run into this problem, or had any experience with a Furuno NavPilot 300 and a Comnav controller.
Thank you.