Anchor pulpit roller

[Depot]

Hi
Just bought a 2001 Mainship 390 and the anchor pulpit only has a sleeve on the bolt and not a roller. does anyone know what roller I need?
Thanks
Steve

 

[C lectric]

No one yet?
Don't know what you need but you can measure the width of the support and allow approx. 1/8" clearance on the ends.
Then decide what diameter you want, go as big as will fit, and measure the bolt hole diameter of the existing bolt if it fits well.

 

[Comodave]

You will have to measure and see what will fit. A quick google and Defender has several different sizes and materials.

 

[Depot]

No one yet?
Don't know what you need but you can measure the width of the support and allow approx. 1/8" clearance on the ends.
Then decide what diameter you want, go as big as will fit, and measure the bolt hole diameter of the existing bolt if it fits well.

Thank you. Done.

 

[TBed]

Hi
Just bought a 2001 Mainship 390 and the anchor pulpit only has a sleeve on the bolt and not a roller. does anyone know what roller I need?
Thanks
Steve, have the same on my 34 Pilot but when I went to add a roller I realized the PO did it on purpose to accommodate a new anchor. With only the sleeve the Delta anchor fits snugly under the anchor pulpit. With even a thin roller it would stick out too far.

 

[TrawlerAJ]

I replaced mine several years ago with this Delrin roller. still looks brand new after several seasons. I have a 400, not a 390, so you'll have to make sure the dimensions are proper for your boat. White Water does seem to make various sizes...

White Water White Delrin Bow Anchor Roller Replacement Wheels (7564U - 3" Diameter, 3-3/8" Width)​

https://www.amazon.com/gp/product/B01MD1RMEH/

 

[rslifkin]

I replaced mine several years ago with this Delrin roller. still looks brand new after several seasons. I have a 400, not a 390, so you'll have to make sure the dimensions are proper for your boat. White Water does seem to make various sizes...

White Water White Delrin Bow Anchor Roller Replacement Wheels (7564U - 3" Diameter, 3-3/8" Width)​

Amazon.com

I'll second those working well. I've had one of theirs on my boat for a few years now and it still looks like new.