Lostsailor13
Senior Member
Can’t find 5/8 wall to 1/4 glass locking window gasket anywhere,I found 3/4 wall to 1/4 inch glass,and have countless hrs logged,hopefully someone knows where I can get my hands on this
All hands on deck
- Thread starter Lostsailor13
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
mvweebles
Guru
- Joined
- Mar 21, 2019
- Messages
- 7,890
- Location
- United States
- Vessel Name
- Weebles
- Vessel Make
- 1970 Willard 36 Trawler
Picture of the close one would help. I recently sourced some window gasketing, but not sure of size or style.
Good luck with the hunt.
Peter
Good luck with the hunt.
Peter
OP
OP
Lostsailor13
Senior Member
The gasket is typical 1 or 2 pc locking window gasket the wall thickness is 5/8 and the glass thickness is 1/4 inch
OP
OP
Lostsailor13
Senior Member
Weebles you once had a guy in Cali with the molds to form the curved corner windows do you still have his contact info
mvweebles
Guru
- Joined
- Mar 21, 2019
- Messages
- 7,890
- Location
- United States
- Vessel Name
- Weebles
- Vessel Make
- 1970 Willard 36 Trawler
Here you go. Hes old school and prefers telephone to email or text.
https://www.markplastics.com/contact-us
He's a good guy. He was getting a bit tired of the business when I talked to home a couple years ago. Don't delay if you're interested. His pricing is reasonable for what you get. Note that the windows will not be easy to fit when you get them, but better than alternatives.
I only ordered the curved plexi panes from him. Rest is custom. I should have ordered the complete windows from him. It's turned out well, but first guys (Niza Marine in Ensenada) were a disaster and much of their work had to be redone. Some general pics attached
Good luck Peter
https://www.markplastics.com/contact-us
He's a good guy. He was getting a bit tired of the business when I talked to home a couple years ago. Don't delay if you're interested. His pricing is reasonable for what you get. Note that the windows will not be easy to fit when you get them, but better than alternatives.
I only ordered the curved plexi panes from him. Rest is custom. I should have ordered the complete windows from him. It's turned out well, but first guys (Niza Marine in Ensenada) were a disaster and much of their work had to be redone. Some general pics attached
Good luck Peter
Similar threads
