ramkay

Tequila and boating, perfect combination 😂

Bill, after you remove the hoses from each end, loosen up the bracket and remove the heat exchanger for a close up visual inspection...

On my GB32 I used Ultra Suede from Japan. Excellent material, Suede Leather feel even though it's synthetic, easy to clean with soap and...

Hi grandbanksbayfield, I installed on my GB32 a Vetus 130 Bow Pro 5.7kw in 2021. It's a great piece of equipment. It has a built-in fuse...

Thanks again Bmarler. Just to be on the safe side, I have already scheduled the work for: Replacing the head gasket Replacing the...

One more thought, if the circulating pump is leaking, or coolant is exiting the weep hole, you may be pulling air in as well as losing...

I can’t tell from the photo, but it doesn’t look like there’s a coolant recovery tank anywhere. If that’s the case, the coolant level in...

Thanks captnscott. I cruise at 1800RPM too and everything is normal as far as temp and oil pressure, the only thing is that the leak...

My dilemma is that even at a normal temperature of 80°C I still have coolant leakage. The exhaust has hardly any smoke at up to 1500RPM...

Thank you Bmarler. Attached is a pic of the the coolant tank system on the engine. At high RPM it starts to burp and bubble and then...

Thank you Mambo 42. If I leave it running at full throttle (2000RPM presently) the temperature will reach 100°C+ in less than 10...

No Comodave, I did the cable adjustment after noticing the RPM issue

Thanks jp. Yes the engine goes beyond 2500RPM in no load mode. However, this situation arise rather suddenly after the annual engine...

Thanks Comodave

As to the coolant leak you could put some dye into the coolant. Then use the UV light to see where it is leaking. This is the kit I...