The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
K

Latest activity Postings About

    • K
      kpinnn replied to the thread refrigeration.
      Kchance, Happy to hear no generator. Recently I removed a 5KW Westerbeke generator. The engine was great but the back end went bad. I...
    • K
      kpinnn replied to the thread refrigeration.
      Kchance I have felt my problem was the same. I never thought of regulating the input voltage. I read the drop out voltage was 10.4 volts...
    • K
      kpinnn replied to the thread refrigeration.
      The voltage drop issue needs to be addressed. The plus’s side is supposed to be wired directly to the battery. It presently goes through...
    • K
      kpinnn posted the thread refrigeration in General Discussion.
      About 9 years ago I replaced a Nor cold refrigerator on a new boat to us with a new 0041 Nor cold. In 9 years I bet there is less than...
    • K
      kpinnn replied to the thread 1975 Gulfstar 36’.
      I own that vessel and it very seldom is under 6 knots. There is no problem hitting hull speed at 2250 RPM. I figure 2.5 gph at 2250...
    • K
      kpinnn posted the thread Throw rings in General Discussion.
      It has been two years since I bought a throw ring. Yes every two years the line on the outside of the ring rots. The ring itself is...
    • K
      kpinnn posted the thread nextgen in General Discussion.
      anyone have any experience with nextgen gensets?
    • K
      kpinnn posted the thread Dingy lights in General Discussion.
      Looking for lights to use on an inflatable. This is an AB 9.5 ft. would like position lights and all round or tri. Something water proof...
    • K
      Ok, my last thread delt with repair generator or go inverter and larger house bank with solar. I decided to go with generator and add...
    • K
      kpinnn replied to the thread Should I replace the dynaplate?.
      I appears to be part of the bonding system. I have been lead to believe there is no way to clean the pores after it has been painted. It...
    • K
      I have a 6 x18 dynaplate on a trawler that sometime in the past was painted. Supposedly rendering it useless. I sanded the paint off it...
  • Loading…
  • Loading…
Back
Top Bottom