Ken E.

In Bellingham, but close to you. Aaron Bandstra, Marine Consultants 369 594 9926. Aaron is ex-SeaView North boat yard, formerly the...

On my NL 5kw genset, there is a switch on the generator end (stbd side) that I have bumped to the off position many times inadvertently...

We replaced the original Princess with a Force 10. It's a drop-in replacement and does a good job.

ASD will be going north again this year. The Admiral is insisting SEAK again as she found a new fishing "hot spot." I hope the weather...

Still planning on BC this summer and looking forward to it.

I also bought a Torrid from Sure, 10 years ago or so. I hope they're still around. It's been a good unit and one of the few water...

As you mentioned, lots has been written on this already and it is highly subject. 1. I have twin engines. I like the redundancy and...

I use Propspeed in Bellingham Wa's cold water and get 3 years with very little growth. I've used it for 20 years with the same good...

It's my understanding that when the Kelso Washington Tollycraft plant closed, the molds were sold, some going to Mexico. Where were the...

Regarding DD advise, this forum is a good place to try for some guidance. There are present users of 2-cycle Detroits here who know...

I have a Hatteras and changed from copper to Pex. Made the change because of lack of access to some of the flare fittings for tightening...

Slightly off-topic but is anyone here using WI Fi Calling with Verizon?

Real character, and salty!

This agrees with my tests. If I reduce speed from about 8 to 7 knots, 200 rpm, I use 30% less fuel. That the reduction is this much...