Quote:
Originally Posted by grahamdouglass
I came across a shorter version of the DC Logic video. It is 9 min vs 28 min suggested above. Both are very straight forward to the point videos.
|
So I went down to the boat with great hopes of a good resolution.
I have 6” of access above the control panel, and 1” of access between the control panel cover and the nonservice side insulated enclosure. 45 min later I had the control panel cover off.
I had 13volts at the circuit breaker which I replaced with a blue seas. I measured 13 volts at the back of the start switch on the control panel. 13 volts at the back of the preheat switch on the control panel.
I swapped out the preheat relay and start relay and cleaned the terminals. I measured continuity at the main fuses.
The start light does not come on.
Tomorrow I will phone Northern lights